Is anyone else having issues getting the .exe to load or do anything when plugged in? I’ve tried multiple computers with multiple different 525s.. when I click on the E: drive in the tree, it will load as long I’ll let it then crash.
Powerflex 525 USB config
- Thread starter Snap25
- Start date
Operaghost
Member
I've had no luck with Windows 10. Windows 7 works like a charm. I'm guessing RA needs to do a firmware update to make it compatible with Win10.
OG
OG
janner_10
Lifetime Supporting Member
Never tried the USB config, but CCW is free to download and pretty easy to get a PF 525 set up via Ethernet. Maybe worth a try.
Similar Topics
Is the firmware in the PowerFlex 525 not compatible with Windows 10?
I like to configure these ahead of time so I am not fumbling on the job...
I'm trying to configure a bunch of VFD HIMs via the USB connection on the 525s. Windows will only show it under "Other Devices" as a USB MASS...
Has anyone used this? The idea is that you can connect your computer to the control module of the drive with a USB cable, and upload/download...
Hi to all. We need to change a bad powerFlex 525 to a new one. How do you save the configuration to install in the new one? Thank you all for...
Im trying to teach a couple of labs on VFDs at a community college. We have some motor control trainers with P525s and 3 phase motors from...