sandeeppatil1980
Member
hello ,
I am doing programming for one process
using controllogix PLC , its haveing PCV(Process control valve)4-20 ma
i have two condition
1 . if Operator chages PID Mode from Auto to manual during running
how to handled this condition in prog
2. if he changes to maual to auto ...//........
how the rammping factor work for it?
Thanks
sandeep patil
I am doing programming for one process
using controllogix PLC , its haveing PCV(Process control valve)4-20 ma
i have two condition
1 . if Operator chages PID Mode from Auto to manual during running
how to handled this condition in prog
2. if he changes to maual to auto ...//........
how the rammping factor work for it?
Thanks
sandeep patil