Kinetis 6000 pls

jimcav

Member
Join Date
Dec 2004
Location
new jersey
Posts
229
Good morning,

Does the kinetics 6000 have or can I add some module to give me digital outputs, I worked with an other manufacture that has outputs that where call programable limit switches.

Thanks
Jim Cav
 

Similar Topics

Howdy guys - Looking for some insight on the MAM instruction. Had an interesting one today: I performed a controller upgrade on an older system...
Replies
1
Views
425
Hello everyone: I am looking at the possibility of migrating Kinetix 6000 to Kinetix 5700(460V 3 phase). Reviewing the drive catalog, I have the...
Replies
4
Views
1,104
Hi guys, Can anybody point me in the right direction to locate a EDS file for a Bosch Weld Timer PSS6000? I have trawled the Bosch Rexroth site...
Replies
0
Views
483
We have two similar pieces of equipment, one of them uses a Kinetix 6000 for an axis and the other uses a Kinetix 350. When power is removed...
Replies
1
Views
839
{Old Indramat guy here} (*) How do you 'jumper out', logically, a drive on a Kinetics 6000? For example, I have a Power Module (Node 20) and...
Replies
3
Views
1,754
Back
Top Bottom