archaeological dig for Micro84

TheWaterboy

Lifetime Supporting Member + Moderator
TheWaterboy
Join Date
May 2006
Location
-27.9679796,153.419016
Posts
1,924
I have been asked to work on a still running Micro84 system that I built in the mid 80's. I have one PLC throwing e60 which usually means PLC death, probably the ER3400 eeprom I would guess. Anyone got any holding a door open they want to part with? Or been successful fixing them and want to share info?
 

Similar Topics

dcam
115vac outputs on unenergized dig ouput card
Hello all, struggling with an intermittent issue where i have 115VAC on outputs that are not energized(no light, not called for by program) . I've...
Replies
6
Views
2,184
agdacanay77
A
B
S7-314c-2 pn/dp dig in/out
Hi all I'm having issues with the Digital Inputs and Outputs. I have a Digital output that I am clearly switching on, I can see the output is...
2
Replies
18
Views
3,172
DeKemp
D
J
Powerflex 700 VC Fault Clear using dig input and pushbutton
I've set up a powerflex 700 with Digital Input 1 (set to Stop - CF), and wired a pushbutton to give the input to clear faults. I've verified that...
Replies
1
Views
3,613
Jasondelane
J
7
Grundig Electronic STE-02
Hi. Can somebody please help me here. I have a Deckel: Our machine is Type:FP5CC/T Nr:2829-0147 Grundig SPS system Steuring-Typ: 6004 07 016502 00...
Replies
0
Views
1,935
750dtu
7
O
Sending numberical value via Dig IO
Please see my other thread about my project here. I am counting the number of people in a basement using many small cost effective PLC's but am...
Replies
8
Views
2,564
ojz0r
O
Back
Top Bottom