S7-1200 with modbus Altivar 312
- Thread starter pothead
- Start date
grnick50
Lifetime Supporting Member
I wrote sample code a few years back just for what you want.
https://support.industry.siemens.co...7-1200-using-modbus/99153/?page=0&pageSize=10
I hope it helps.
https://support.industry.siemens.co...7-1200-using-modbus/99153/?page=0&pageSize=10
I hope it helps.
CRISTHOFER1996
Member
disculpa podrias compartir el proyecto que realizaste e intentado realizar la comunicación pero no obtengo resultado. gracias
Similar Topics
Hi all,
Currently having trouble getting a speed reference to write over modbus to an Omron M1...
I can successfully write a run command and...
can i send and recieve data using my yokogawa UT35A controller with my siemens s7 1200 plc using profinet communication without using gsd file
Hello all.
I am trying to read out the values from a Carlo Gavazzi EM340 energy analyzer via Modbus communication.
The S7-1200 PLC has the CB1241...
Hello All
I have a modbus tcp device(Julabo magio) with an DB9 pin assignment. Pin3=B and Pin8=A. I would like to connect it on the secondary...
Hi all,
reading out parameters from a Weg CFW500 VFD using a Siemens S7-1214 CPU over Modbus RTU (CB1241). Using the PLC's built-in Modbus...