Hello, we have a servo saw with an siemens plc s7-1200, a comfort panel 12 inches, we want to import data from excel files on a server with a bar code already existing on these files and display these excel sheet in a similar format to the screen, the factory uses Epicor as ERP software, what you advise to exchange the data, is opc is a good idea, does Epicor support opc? Should i use the recipes in tia portal to display cutting list on hmi? As this project is new to us, your experience would be profitable and appreciated. Thanks
S7-1200 cut list data exchange
- Thread starter fons04
- Start date
Similar Topics
Hi all,
Currently having trouble getting a speed reference to write over modbus to an Omron M1...
I can successfully write a run command and...
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Hi, I have attached herewith one image which our programmer has been used in S7 1500 PLC. Now we need to use the same instructions in S7 1200 PLC...
commentaire communiqué siemens s7-1200 avec vfd delta ? (cablage et sur tia portal )
Hi, I have a 1214 on ip 192.168.0.100. This is connected to other modules through a switch on same network. I need to connect this to a company...