New Automation Direct (Koyo) PLC

Look good
With that prices the PLCs manufacturer will pay as to use they product.
I going to download the programming software and check it.

It only matter of time the will introduce analog cards and some other stuff.
 
I may give the software a try as well. We have been getting some cheap PLC's for the local tech school. I like free software.
 

Similar Topics

alanc5
Koyo/ Automation Direct I/o
I AM MESSING AROUND WITH A KOYO/AUTOMATION DIRECT I/O CHASSIS(A 205) IT HAS A 16 PT. INPUT MODULE AND A 12 PT. OUTPUT MODULE. I AM COMMUNICATING...
Replies
6
Views
5,620
alanc5
alanc5
M
koyo (automation direct) help
Here is the problem that I have The program relies on x4 toggling back and forth from on/off to create the timing and thus the location of the...
Replies
2
Views
4,396
Steve Bailey
Steve Bailey
R
Automation direct DL206 (d2 262 plc) and HMI EA9T6CL-R - set date and time through HMI
Hello, I have an automation direct d2 262 plc and C-more HMI EA9T6CL-R. I need to prepare a program, scheduled to be performed on a future date. I...
Replies
1
Views
116
tarik1978
T
B
peak voltage detector Automation direct 06
Hello all- I have a unique challenge using a customers Direct logic 06 PLC. This customer has a DC motor operating at 10 RPM which is turning a...
Replies
1
Views
131
drbitboy
drbitboy
M
Command over Ethernet/IP (Sysmac Studio and Automation direct GS20)
Hi, I have been trying to run drive via Sysmac studio. I can ping the drive. I can see the logic bits going on/off as per command. But, drive is...
2
Replies
21
Views
549
tarik1978
T
Back
Top Bottom