AXSYS Motion Controller

kootni

Member
K
Join Date
Nov 2018
Location
England
Posts
69
Hi
We have a machine that has AXSYS motion controller on it. Does anyone has a software/manual for it? how does it work? It has input coming in from OMRON plc.

Picture attached.

AXSYS.jpg
 
Last edited:

Similar Topics

R
SoMachine Motion Service 4.3
Hello Everybody Anybody knows where I can get this version of SoMachine? The new machine expert version won't open my project saying there is a...
Replies
0
Views
36
RodrigoPLC
R
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
84
mk42
M
C
Módulo Motion FX5-40SSC-S
Bom dia, Estou com uma máquina parada algum tempo, meu servo funciona em modo manual, porém não funciona em automático. Meu equipamento e...
Replies
0
Views
60
CapaceteJR
C
A
Different Drivers and motors motion sync in Rockwell Studio 5000
Hi currently my existing PLC using AB motor & driver to spin production, however customer want to another set, if this possible we use different...
Replies
1
Views
216
robertmee
R
H
Motion control use torque loop in Rockwell Studio 5000
I have always controlled servos in Rockwell motion using position loop. I have an application where one process will push against a servo...
Replies
3
Views
270
robertmee
R
Back
Top Bottom