Ive been looking into switching some projects over that currently use PanelView Plus 6 600's to using Panelview 800's. Since the aforementioned projects are all controlled by Micrologix controllers, 1200 or 1400's, im just clicking around in CCW trying to figure out if this is truly a switch i want to go through with.
The main issue im running into is that i cannot figure out how to use the Tag Editor if im not connected to the controller in the real world. From the videos ive watched it seems pretty straight forward if youve got the controller connected to the PC but i cant figure out how to just import the list of tags when nothing it attached to your PC. Whereas in FTVS you could do that with the DB Browser or the like.
The main issue im running into is that i cannot figure out how to use the Tag Editor if im not connected to the controller in the real world. From the videos ive watched it seems pretty straight forward if youve got the controller connected to the PC but i cant figure out how to just import the list of tags when nothing it attached to your PC. Whereas in FTVS you could do that with the DB Browser or the like.