S7 PLC Multihop

destination unknown

Member
D
Join Date
Jun 2010
Location
Ireland
Posts
118
With Rockwell PLC's it is possible to go online with a remote PLC via multiple networks jumps e.g. PC ->(ENET1)-> PLC1 -> (ENET2) -> PLC2

Is there a method to do this with S7 PLC's?

See attached for a crude depiction.

Multihop.png
 

Similar Topics

P
AB PLC, Rslogix 5000, alarm issue
Hi folks, in the alarm manager of Rslogix 5000, the tag-based alarm has been created. But when I tried to change the condition, it was found the...
Replies
0
Views
21
PLCbug123
P
H
PLC NAT Suggestions.
I know this topic has been brought up a few times, but i had some specific questions. I have installed several 1783-NATR devices and they have...
Replies
0
Views
47
HoldenC
H
H
No communication with PLC 90-70
Hello We have installed several G.E. Fanuc 90 70 PLC Everything was ok but suddenly we can not communicate anymore with any PLC with the software...
Replies
0
Views
33
Hazatov
H
Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
51
Voltimus
Voltimus
P
PLC MICROLOGIX 1000 AND 1761-NET-ENI
"Hello! Good day! Excuse me, I have a question regarding the 1761-NET-ENI. RSLinx has already detected it but it's not connecting to the PLC...
Replies
4
Views
92
roxusa
R
Back
Top Bottom