I'm trying to communicate with some Flex IO modules from a ControlLogix PLC but I'm not having much luck.
1756-L61 -> 1756-ENBT/A -> 1794-AENT
Connected to the AENT are the following
0. 1794-OB16/A
1. 1794-OB16/A
2. 1794-OB16/A
3. 1794-OB16/A
4. 1794-IE8/B
5. 1794-OE4/B
6. 1794-IB8/A
I can access the 1794-AENT fine, it shows up in RsLinx and in the RsLogix 5000 project. All of the modules have a yellow exclamation mark in RsLogix though (Code 16#0203 connection timed out) and don't show under the 1794-AENT in RsLogix.
The weird thing is when I was poking around the Flex IO last night two of the modules showed up in RsLinx (the two analogue modules in positions 4 & 5) and the error code for those two modules in RsLogix changed to something along the lines of "configuration format rejected".
Any ideas?
The Flex IO is mounted in a panel at the moment so the next step might be to pull them out and put them on the bench to test them.
RsLogix:
RsLinx:
1756-L61 -> 1756-ENBT/A -> 1794-AENT
Connected to the AENT are the following
0. 1794-OB16/A
1. 1794-OB16/A
2. 1794-OB16/A
3. 1794-OB16/A
4. 1794-IE8/B
5. 1794-OE4/B
6. 1794-IB8/A
I can access the 1794-AENT fine, it shows up in RsLinx and in the RsLogix 5000 project. All of the modules have a yellow exclamation mark in RsLogix though (Code 16#0203 connection timed out) and don't show under the 1794-AENT in RsLogix.
The weird thing is when I was poking around the Flex IO last night two of the modules showed up in RsLinx (the two analogue modules in positions 4 & 5) and the error code for those two modules in RsLogix changed to something along the lines of "configuration format rejected".
Any ideas?
The Flex IO is mounted in a panel at the moment so the next step might be to pull them out and put them on the bench to test them.
RsLogix:
RsLinx: