upgrade slc5/03 to slc 5/04

alexdrt

Member
Join Date
Aug 2017
Location
poland
Posts
1
hello everyone
i need your help , i want change my cpu slc5/03 to slc5/04 but my slc5/03 is connected with panel ( DTAM plus ) by DH485 protocol .
and slc5/04 use DH+ protocol , and i can't access to my panel so the question is how can i connect my new slc5/04 to my panel ??
there is adapter or converter from DH485 TO DH+ ??

thanks a lot .
 
A the DB-9 serial port on a SLC 5/04 or SLC 5/05 can be configured to DH-485. Just be advised that once it is changed to DH-485, you will need a DH-485 communication adapter such as a the 1747-UIC USB adapter or the old PIC box to establish programming communications. RS232 will no longer work.
 

Similar Topics

we are upgrading our plc from a slc5/03 to a slc 5/05 and when we try to verify the project we get the error that says "error msg instruction is...
Replies
5
Views
4,589
Hello everyone, I thank you in advance for reading my question! A little info of the upgrade, and my experience. Please feel free to skip to the...
Replies
4
Views
1,730
I have a SLC5/05 with the standard 16k of memory, and I'm out of storage space. Are the 32k/64k memory chips just plug and play, or does it...
Replies
2
Views
1,172
Hello all, What are status bits need to look when we upgrade SLC 5/03 to SLC 5/05 processor. I have right now SLC 5/05 processor I want to replace...
Replies
1
Views
1,349
I have spent far too much time on this and not got communication working yet. Equipment: SLC 5/03 1747-L532 series C, Panelview Plus 600...
Replies
10
Views
4,060
Back
Top Bottom