SLC5/03 connect to panelview 800

abrown01

Member
A
Join Date
Nov 2013
Location
Auckland
Posts
3
Hi there,

I'm wanting to connect a panelview 800 to an SLC5/03 the SLC is connected to an 1747-AIC which is run to another 1747-AIC. I'm trying to figure out what cable I require to connect the peripheral of the second AIC module to the panelview. I can't seem to find any reference online. Any help would be appreciated.

Unsure.jpg
 

Similar Topics

S
How to connect a SLC5/03 to a PC via DH485 (RJ45)?
Hi, I have a SLC5/03 connected to a working HMI via RE232 port, and connected to a broken HMI via DH485 (RJ45), I want to use the cable that used...
2
Replies
15
Views
3,283
geniusintraining
geniusintraining
B
Connect to SLC5/03 through attached Panelmate's #2 serial port?
Hello, I have one legacy system that I'm trying to troubleshoot - it's a SLC5/03 connected to an old Panelmate 1785. I can connect to the SLC...
Replies
6
Views
1,445
geniusintraining
geniusintraining
S
What is the cable pinout to connect a Magelis XBTGT HMI to SLC5/03 DF1
Tried a straight through 9-pin RS-232 and a null model cable. No luck so far.
Replies
0
Views
1,546
sanger
S
S
Numatics valve manifolds connect to slc5/05
Looking for some help to understand memory mapping for a slc5/05 utilizing a 1746-sn module to (2 manifolds) numatics 2.2 manifold coupled via...
Replies
0
Views
2,212
slimpickens51
S
E
can't connect to a slc5/04
Hello , im trying to connect to a slc 04 using the rs232 port but for some reason when i auto configure want let me , says check cable or switch...
2
Replies
17
Views
4,322
harshman
H
Back
Top Bottom