Connecting and configuring CP1430TF from S5

gustavo_dias

Member

G

Join Date

Aug 2016

Location

Minas Gerais

Posts

76

• Aug 17, 2017

• #1

Hi all,

I'm trying to configure a CP1430 TF card, i already include the COM1430 in step5 but i have no ideia how to configure it. In siemenes manual say nothing about it. I'm using a TTY-USB cable for communicate with CPU (135u/928B), with this cable can I configure CP module? I need to plug in the cable in CP/PC or plug in CPU can I configure?

 

sigmadelta

Member

S

Join Date

Apr 2016

Location

From Canada - Living in Bulgaria

Posts

2,013

• Aug 17, 2017

• #2

Try these as a starting point:

https://cache.industry.siemens.com/dl/files/144/12586144/att_107715/v1/Com1430_1e.pdf

https://cache.industry.siemens.com/dl/files/718/12585718/att_20314/v1/Com1430_2e.pdf

 

sigmadelta

Member

S

Join Date

Apr 2016

Location

From Canada - Living in Bulgaria

Posts

2,013

• Aug 17, 2017

• #3

As far as I can remember, you could plug the regular S5 Programming cable (RS-232/TTY).

 

gustavo_dias

Member

OP

G

Join Date

Aug 2016

Location

Minas Gerais

Posts

76

• Aug 17, 2017

• #4

This is the manual that I talk about. I don't see nothing about it in this manual

 

sigmadelta

Member

S

Join Date

Apr 2016

Location

From Canada - Living in Bulgaria

Posts

2,013

• Aug 17, 2017

• #5

Which software do you use in Windows to program your S5?

 

gustavo_dias

Member

OP

G

Join Date

Aug 2016

Location

Minas Gerais

Posts

76

• Aug 17, 2017

• #6

Step5 for DOS V7.23

 

sigmadelta

Member

S

Join Date

Apr 2016

Location

From Canada - Living in Bulgaria

Posts

2,013

• Aug 17, 2017

• #7

Chapter 3 of the Com1430_1e.pdf document is where to start.

 

sigmadelta

Member

S

Join Date

Apr 2016

Location

From Canada - Living in Bulgaria

Posts

2,013

• Aug 17, 2017

• #8

This is a guide to setup communication between S5 and S7... you could just follow the S5 part. SEND/RECEIVE is the most common communication setup for the CP1430TF.

https://support.industry.siemens.co...tic-s7-via-industrial-ethernet?dti=0&lc=en-WW

 

sigmadelta

Member

S

Join Date

Apr 2016

Location

From Canada - Living in Bulgaria

Posts

2,013

• Aug 17, 2017

• #9

Curious... which USB/TTY cable do you use? Who makes it? I don't know if it will work with COM 1430 TF

 

sigmadelta

Member

S

Join Date

Apr 2016

Location

From Canada - Living in Bulgaria

Posts

2,013

• Aug 17, 2017

• #10

And yes, you do have to plug it in to the CP (not the CPU).

 

gustavo_dias

Member

OP

G

Join Date

Aug 2016

Location

Minas Gerais

Posts

76

• Aug 17, 2017

• #11

The doc don't show me the step by step, it don't explain the details.
I'm using S5-USB, it's a tecnatron device.
If the TTY doesn't work, i can use AUI cable to do this?

 

sigmadelta

Member

S

Join Date

Apr 2016

Location

From Canada - Living in Bulgaria

Posts

2,013

• Aug 18, 2017

• #12

No, you cannot use AUI

 

sigmadelta

Member

S

Join Date

Apr 2016

Location

From Canada - Living in Bulgaria

Posts

2,013

• Aug 18, 2017

• #13

The "Commissioning and Configuring an ISO Transport Connection between the SIMATIC S5 and SIMATIC S7 via Industrial Ethernet" doc does show you step-by-step what to do to setup the CP1430TF. Look under the heading Configuration of the transport communication on the SIMATIC S5