Trex7734
Member
Where can I download these AOI Instructions? Can't find SCP for slc500?
Aoi
- Thread starter Trex7734
- Start date
OkiePC
Lifetime Supporting Member
There are no add on instructions for RSLogix 500 software which is used to program the SLC500 and Micrologix families. The SCP instruction is part of the instruction set but may not be supported on all models that the software supports.
James Mcquade
Member
I saved common instructions into the library and then pasted them into my program.
I used indexed edit for the addresses.
what model of slc 500 are you referring to?
james
I used indexed edit for the addresses.
what model of slc 500 are you referring to?
james
Last edited:
Similar Topics
I have a PH meter that I am trying to bring its data into 1756-L81. I have downloaded the Rockwell MODBUS AOI kit, but I am not sure if I need to...
I am very new to Modbus and the industry, so forgive me if I am missing something obvious. I have known Modbus register addresses coming from a...
Does anyone know of an AOI using the user ASCII protocol select on the L6x controllers that will talk Modbus RTU using RS-485?
Thanks,
Trevor...
I have an AOI with revision notes. Someone entered the last note into the description instead of the notes. I cannot just click into the revision...
Hi
Hope you all are doing well.
Iam working on a project with some AOI. I also hate no online edits... lol.
My problem occurs when I use a UDT...
