hello,any body can design pnp to npn converter to use plc ,you know plc's work with 4 to 20 mA and 0 to 48 DC volt or 0 to 120 AC voltage,
upload:
https://imgur.com/a/Qs1NgVe
upload:
https://imgur.com/a/Qs1NgVe
pnp to npn converter
- Thread starter sinister
- Start date
collinsd70
Member
Depending on the number of digital signals...you could just use a relay?
scott.lawrence
Member
alternatively, you could order a different module
could u design with this
https://imgur.com/a/Qs1NgVe
https://imgur.com/a/Qs1NgVe
Designed for you pheonix contact has:
https://uk.rs-online.com/web/p/interface-relay-modules/5329980/
https://uk.rs-online.com/web/p/interface-relay-modules/5329980/
Last edited:
Mickey
Lifetime Supporting Member
Similar Topics
Hi to All,
How I can change NPN to PNP solid state switch?
Exapmle1: D-M9N Solid state switch with D-M9P
Exapmle2: or allen bradley p.e.c. type...
Hello;
I have noticed one thing more that some time OEM selected NPN PLC I/Os instead of PNP while with PNP the trouble shooting is easy. This...
I moved my Shopbot and the only problem that I had was a broken proximity sensor. I found a replacement sensor...
Hi All,
Currently I have a PNP output device A connected towards an NPN input PLC.
Basically, there's 2 output terminals from device A called...
