taknevs
Member
Hi all,
I have a PLC trainer with micrologix 1200 series A. It also has an analog 2 input/2 output module (1762 IF20F2).
I downloaded a simple program not using the IO module at all. When I try to go to Run mode, its giving me an error: Expanion I/O module generated an error (Major error S:6 = 189H)
The status bit S:1/13=1. I checked the I/O module connections with the PLC, it seems OK.
what do I do?
regards
Taknevs
I have a PLC trainer with micrologix 1200 series A. It also has an analog 2 input/2 output module (1762 IF20F2).
I downloaded a simple program not using the IO module at all. When I try to go to Run mode, its giving me an error: Expanion I/O module generated an error (Major error S:6 = 189H)
The status bit S:1/13=1. I checked the I/O module connections with the PLC, it seems OK.
what do I do?
regards
Taknevs