Communication between FX3U and FX3g PLC using Ethernet Module

ankit_patel291

Member
A
Join Date
Mar 2012
Location
UK
Posts
1
Hi,

I am working on Mitsubishi PLC project.I am using two PLC below.

PLC 1 - FX3U (Master)
IP : 192.168.0.10

PLC 2 - FX3g (Slave)
IP : 192.168.0.20

I am connecting both PLC via ethernet module FX3U-ENT. I would like to transfer bit M0 to M15 from FX3G (Slave) PLC to FX3U (Master) PLC every scan cycle. FYI I am not sending any data from Master to Slave.

Please try to help me to sort it out this issue ASAP. If you have any coding example then it will really help me.

Regards,
Ankit Patel
 

Similar Topics

S
Help - Communication between FX3U & Q-Series
Hello Guys I am using two Mitsi PLCs - 1 Q-Series & 1 FX3U. The FX3U is in a remote location monitoring a level and sending it back to the Q...
Replies
1
Views
2,986
plcduck
P
P
Is put/get necessary for communication between 2 PLCs?
Or there is an alternative to this? I suppose there are many but I've only seen put/get Can you for example set up a new plc and connect it to an...
Replies
5
Views
289
JesperMP
JesperMP
A
Loss of communication between PLC and SEW frequency converter
Communication between devices will stop working for a certain period of time. I caught the error message using WireShark. I cannot identify the...
Replies
0
Views
96
AdamV
A
B
Communication error between TM221 with magelis HMIGTO
I am having trouble running the application throught my PLC, tm221me32tk with magelis HMIGTO6310 I have prepared the plc programme, also created...
Replies
0
Views
102
BODUSEYTU
B
S
Communication between toyopuc PC10g and Fx5u
Hi, I am trying to send data register type (D) from Toyopuc PC10g to FX5u. Does it possible to connect both plc using fx5u features which is...
Replies
1
Views
30,615
parky
P
Back
Top Bottom