'Redundant' for SLC 5/05 with Prosoft (MV146-DFNT)? possible?

ckchew666

Member
Join Date
Aug 2003
Location
Malaysia
Posts
591
Hi,

We have a system setup using SLC 5/05 CPU, the question is can we add a redundant/backup ENET using Prosoft MV146-DFNT? So at the same time bothe the 5/05 and MV146-DFNT will transfer data to the HMI/SCADA. So when the 5/05 comm is lossed (line broken) then the HMI will pull data from the MV146-DFNT.

If anyone done this before, can you please let me know how's the addressing goes?
 

Similar Topics

Hi guys, in a redundant dh+ network consisting of one IO scanner (1747-ASB) having a combination of different IO modules in a 13 slot chassis...
Replies
1
Views
3,495
Hi, I am building a SLC redundant system in which i have to make analogue output redundant. I am afraid that when the load will be shifted from...
Replies
0
Views
2,478
dear i am using 2 controller rack of 4 slot. 0 slot using for controller SLC5/4 1 slot 1747 BSN same configuration for the other controller...
Replies
1
Views
2,319
what are the software options, optional packages and hardware to conect one workstation to slc 500 redundant plc
Replies
11
Views
3,098
Hi, I know this sounds weird, but that's exactly what we are looking for. Redundant Power Supply for SLC 500! Our scenario is that we have...
Replies
3
Views
11,667
Back
Top Bottom