Troubles with AOI PFlex 700

dingomex3

Member
D
Join Date
Mar 2012
Location
mexico
Posts
33
Hello, I have troubles with AOI PowerFlex 700. When I want to use it into the logic it says the tags "Inp_PowerFlex_700" and "Out_PowerFlex_700" are boolean tags but in the inside logic these tags should be array tags. I attach pictures

I will appreciate your help with this issue...Thanks

AOI_PFlex700.JPG Logioc_AOI_PFlex700.jpg
 

Similar Topics

J
Duplicating HMI Panel and having troubles with Label names
I copied a panel in factory talk HMI for an identical system. The label names are still the same as the original panel but I am trying to change...
Replies
1
Views
129
Nafir
N
Phil Melore
  • Locked
  • Sticky
Password issues? Login issues? Forum troubles?
Hi folks, If you're having any login issues kindly send an email to [email protected] or use the 'contact us' link on the bottom of every page to get...
Replies
0
Views
1,077
Phil Melore
Phil Melore
Z
PanelView 550 troubles
Hello all, I am currently addressing a failing screen on a PV550. The first thing I did was upload the program onto an Allen Bradley memory card...
2
Replies
29
Views
7,334
James Mcquade
J
P
Kinetix350 Troubles, Again...
Hey Folks. I'm having a little issue with a Kinetix350. Long story short. I have burned 2 2097-V34PR5-LM in the past few months on the same...
Replies
6
Views
2,762
Jim3846
J
L
Beginner having troubles with TwinCAT 3 basics
Hello! I'm a complete beginner to programming and i have a project i'm working on in TwinCAT 3 since i'm using a Beckhoff PLC. One of the...
Replies
4
Views
2,339
kalabdel
K
Back
Top Bottom