Sending G code to NCU
- Thread starter kresop
- Start date
Saffa
Member
G code is just ASCII text. So yes, no reason you couldn't send it from a PLC if your PLC has instructions for sending ASCII out of a serial port
Please read all posts from the begining. The point is to send it to NC and NC accept it as G code or NC part program whatever you call it.
Saffa
Member
This is the question I answered. You have several questions. I have no idea about what an NCU is.
First, you need to tell us which NCU you're using from Siemens. Is this an 840Dsl?
For support, manuals, etc, go to https://support.industry.siemens.com/cs/start
Essentially, it's a CNC controller. They often have a built in, but separate, PLC.
For support, manuals, etc, go to https://support.industry.siemens.com/cs/start
Essentially, it's a CNC controller. They often have a built in, but separate, PLC.
Similar Topics
I'm trying to use a Allen Bradley 1769-L24ER-QB1B PLC to send a command from my Studio5000 logic to a Cognex DataMan 262Q barcode scanner...
Anyone know how to receive the string (UPC Code) from a dataman 302 (Cognex) to a SLC 5/05. I need to be able to retrieve this code, and I am...
I’m attempting to send a temperature from a SLC-5/02 to an EZiMarquee display. The vendor said to use a MSG instruction to send the data to the...
Hi
I need to send a null command down a comms port. But in the crimson software when i used /x00 it coming back "Cannot use null character is...
I've been having some trouble figuring out how to get the ip address for the mail relay server, is it something that I need to create separately...
