Hi All
Just to explain a little better what im trying to achieve.
I want to use a Mitsubishi FX0-30MR-ES with 3 BCD thumbwheel switches and an enter and clear push button on the inputs, the outputs are 13 contactors which need to be switched in such a way that they dont follow a repeating pattern fully. To operate you would select a number between 1 & 603 on the thumbwheels then press enter to initiate the outputs for the coresponding contactors then I want this to stay selected regardless of thumbwheel position until another number in the range 1 - 603 is selected and entered or the clear button is pressed to disable all outputs.
Ive had a look at the mitsi manual and find it hard to understand especially about keying in the functions in GPPWIN.
some examples of output sequence required:
BCD.No. Outputs Required
001 y01
015 Y0,Y3,Y4
025 Y1,Y2,Y3,Y5
045 Y1,Y4,Y6
095 Y1,Y4,Y5,Y7
355 Y0,Y3,Y5,Y6,Y9,Y10,Y11
555 Y1,Y3,Y5,Y7,Y8,Y9,Y10,Y11,Y12
603 Y0,Y1,Y2,Y3,Y4,Y5,Y6,Y7,Y8,Y9,Y10,Y11,Y12
I have a full list of outputs required from 1 to 603 if this would help. Any help on this would be appreciated.
Skeggy
Just to explain a little better what im trying to achieve.
I want to use a Mitsubishi FX0-30MR-ES with 3 BCD thumbwheel switches and an enter and clear push button on the inputs, the outputs are 13 contactors which need to be switched in such a way that they dont follow a repeating pattern fully. To operate you would select a number between 1 & 603 on the thumbwheels then press enter to initiate the outputs for the coresponding contactors then I want this to stay selected regardless of thumbwheel position until another number in the range 1 - 603 is selected and entered or the clear button is pressed to disable all outputs.
Ive had a look at the mitsi manual and find it hard to understand especially about keying in the functions in GPPWIN.
some examples of output sequence required:
BCD.No. Outputs Required
001 y01
015 Y0,Y3,Y4
025 Y1,Y2,Y3,Y5
045 Y1,Y4,Y6
095 Y1,Y4,Y5,Y7
355 Y0,Y3,Y5,Y6,Y9,Y10,Y11
555 Y1,Y3,Y5,Y7,Y8,Y9,Y10,Y11,Y12
603 Y0,Y1,Y2,Y3,Y4,Y5,Y6,Y7,Y8,Y9,Y10,Y11,Y12
I have a full list of outputs required from 1 to 603 if this would help. Any help on this would be appreciated.
Skeggy