ajax
Member
Hi
I would like to find out what type of connectors are used for the IMC S class servo controller. I am replacing a IMC controller with a ControlLogix 1794-M02AE servo module, and need to make an extension umbilical cable between the exisiting IMC and the M02AE connector. The connectors are for the axis servo and feedback connectors, and the axis I/O connectors.
The connectors are 12-way (2 rows of 6 pins), approx 27 mm by 10 mm. Approx 2.5 mm between pins. Unfortunately there is no manufacturer name or part number on the connectors.
I've searched the Rockwell literature without success - I know that pre-wired cables are 4100-CCA15F and 4100-CCAQB, but these cables have the wrong *** connector.
Any help would be greatly appreciated!!!
I would like to find out what type of connectors are used for the IMC S class servo controller. I am replacing a IMC controller with a ControlLogix 1794-M02AE servo module, and need to make an extension umbilical cable between the exisiting IMC and the M02AE connector. The connectors are for the axis servo and feedback connectors, and the axis I/O connectors.
The connectors are 12-way (2 rows of 6 pins), approx 27 mm by 10 mm. Approx 2.5 mm between pins. Unfortunately there is no manufacturer name or part number on the connectors.
I've searched the Rockwell literature without success - I know that pre-wired cables are 4100-CCA15F and 4100-CCAQB, but these cables have the wrong *** connector.
Any help would be greatly appreciated!!!