Rembrant
Member
- Join Date
- Jun 2003
- Posts
- 18
Hello Gentlemen,
I'm just fighting with a little problem here, using a Premium TSX PLC, and I can't get the two Kollmorgen drives(servo)to enable. On their screens is "PO3", which is power, but I want "EO3" for enable.....any ideas?
I've been looking through the program, and I can't seem to find where the PLC is "enabling" them. BTW, both drives work together for a robot.
Anyhow, the end result is, I can't get the servos to run.
Thanks for any help, and If you need more details, let me know please....this thing is killing me.
Rembrant
I'm just fighting with a little problem here, using a Premium TSX PLC, and I can't get the two Kollmorgen drives(servo)to enable. On their screens is "PO3", which is power, but I want "EO3" for enable.....any ideas?
I've been looking through the program, and I can't seem to find where the PLC is "enabling" them. BTW, both drives work together for a robot.
Anyhow, the end result is, I can't get the servos to run.
Thanks for any help, and If you need more details, let me know please....this thing is killing me.
Rembrant