Slightly OT: Energy metering- multiple circuits

Looking for an economic way to monitor kWh and kVARh on multiple circuits (up to 10) in a single distribution board.

The Square D Power Logic Circuit Monitor looks like it will almost do the job, but for that sort of money I could afford to buy separate meters. Can anybody recommend another solution?

I have good luck with Leviton's sub metering products to monitor a building that we lease to multiple tenants. They have solutions for monitoring a whole panel as well.

Electro industries shark meters.

Multipoint meter.
https://electroind.com/product-info/shark-mp200-multi-point-high-density-metering-system/

Frank_ said:

Looking for an economic way to monitor kWh and kVARh on multiple circuits (up to 10) in a single distribution board.

The Square D Power Logic Circuit Monitor looks like it will almost do the job, but for that sort of money I could afford to buy separate meters. Can anybody recommend another solution?

Click to expand...

A permanent solution ? 3 phase or single phase ?

For permanent use a few options below:

Veris (expensive) have lots of options

https://www.veris.com/itemLevelFilt...&resultPage=12&keyWord=&keyWordTxt=&pageNo=12

Another option is Socomec Digiware modular system

https://www.socomec.co.uk/multi-circuit-metering-measurement_en.html

Or if you want to give a startup a go:

https://www.incusense.com/

Or even simpler, depending on your load, direct in line metering, something like the CG EM range

https://www.gavazzionline.com/pdf/broemeng.pdf

I have used all of these products, it depends on your exact requirements which one you want to go for, just ask if you need an help