Logix_Stef
Member
Morning guys,
I am not very familiar with Siemens S7. I have the Step 7 software and adaptor, I van go online and upload/download a program. So far so good. Now I have come to a situation where I have to monitor an analog input coming from a 4 - 20 mA pressure transducer (see the attached). This is probably for most of you very trival so please forgive me. I can't figure out what address the needed input is. If I did have the address I do not know how to search for the address in the program. Surely, there must be something like the RSLogix data monitor, likely called something else. Could someone pint me to the right direction, please? The transducer is connected to a profibus module, I have never worked with profibus so my knowledge is very limited when it comes to Siemens stuff. Any help would be very appreciated. Thanks.
I am not very familiar with Siemens S7. I have the Step 7 software and adaptor, I van go online and upload/download a program. So far so good. Now I have come to a situation where I have to monitor an analog input coming from a 4 - 20 mA pressure transducer (see the attached). This is probably for most of you very trival so please forgive me. I can't figure out what address the needed input is. If I did have the address I do not know how to search for the address in the program. Surely, there must be something like the RSLogix data monitor, likely called something else. Could someone pint me to the right direction, please? The transducer is connected to a profibus module, I have never worked with profibus so my knowledge is very limited when it comes to Siemens stuff. Any help would be very appreciated. Thanks.