Software ECT for Atlas Copco DMC servo drive

The_Harlequin

Member
T
Join Date
Feb 2011
Location
Europe
Posts
30
Hello!

I need the software ECT (for programming Atlas Copco DMC 50720 servo drives).
Atlas Copco or Inmotion doesn't support this series anymore because it's obsolete.

Is it anyone who knows were I can find this software?
 

Similar Topics

E
Atlas Copco DMC2-50720 using ECT software
It was hard trying to find the software ECT for this drive. Finally, I found it but since it is very old it is not intuitive at all. Is there a...
Replies
0
Views
98
elctronyc
E
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
1
Views
30
Lare
L
H
Rockwell Techconnect / Software Licensing Changes
I recently had a conversation with our local RA distributor and learned a few surprising thing (to me) Also, this is mentioned here...
2
Replies
18
Views
5,076
Mispeld
M
H
Connect Stratix 5700 Switch (Software Update problem)
hello guys. I'm using 5 Stratix 5700 Switches 4 of them make DLR(Device Level Ring) And one of them software version is not matched 15.2(6)E1...
Replies
2
Views
2,271
huhu0901
H
H
Rockwell Software Download, limited to certain older version even with TechConnect?
My memory is failing me. I seems to remember I could download which ever version of any Rockwell Automation software as long as they are covered...
Replies
2
Views
2,488
Contr_Conn
Contr_Conn
Back
Top Bottom