Is there anywhere I can download a functional version of the old Omron DOS software, i.e lss2.exe or lss3.exe? I've got a customer in the UK with a machine that doesn't run, so I need to email them the software so they can be my "eyes" for troubleshooting.
OMRON DOS SOFTWARE lss.exe
- Thread starter dkeisel
- Start date
gtsuport
Member
You can download LSS v3.02 at this link.
http://forum.mrplc.com/index.php?act=Downloads&CODE=02&id=81
You may need to register first.
Good Luck!
http://forum.mrplc.com/index.php?act=Downloads&CODE=02&id=81
You may need to register first.
Good Luck!
ArikBY
Member
If you will search under Syswin 3.4 and my name you can find where you can downlode window version.
Similar Topics
Hi,
Any can help me to develop software using omron plc with DOS application?
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Hi all,
i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info.
my unit has an ip address of...
Hi all,
Currently having trouble getting a speed reference to write over modbus to an Omron M1...
I can successfully write a run command and...
Hi There,
I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...