PLC communicatio error

adamly

Member
Join Date
Feb 2008
Location
Tel aviv
Posts
1
Hi
I'm using the 3964R protocol to communicate with a siemens PLC.
Sometimes after the PLC sends the host a telegram the communication between the host to the PLC breaks, the PLC continues to send NAKs.

example:
host:<02>

PLC: <10>

host:<00><00><41><44><08><03><00><02><ff><ff><00><00><01><00><10><03><1e>

PLC: <10><02>

host:<10>

PLC: <00><00><00><4c><10><03><5f>

host:<10>

PLC: <02>

host:<10>

PLC:<00><00><41><44><00><00><00><08><ff><ff><00><53><11><98><00><00><02><00><00><01><15><00><00><00><20><10><10><10><03><f2>

host:<10><02>

PLC: <10>

host:<00><00><00><00><10><03><13>

PLC: <10>

host:<02>

PLC: <15><35>

host:<02>

PLC: <10>

host:<02><00><00><41><44><08><03><00><08><ff><ff><00><04><12><00><02><00><08><00><01><00><00><00><00><00><00><00><10><03><08>

PLC: <15><34>...

Does anybody have any idea what is the problem and how to solve it?
Is the byte after the NAK an error code?

Thanx
 

Similar Topics

dears is there any SFC to handle the communication between OP15 display and S7 PLC? as i need to send and receive some data ( analog and digital...
Replies
1
Views
1,432
My dearest colleagues, do you know, could I connect Modicon PLC M340 CPU BMX P34 2010 and Magelis HMIGT05310 over the USB ports? I saw that both...
Replies
1
Views
3,692
Hello, I'm trying to delve a little into rs-485 communications for a couple projects of mine. Until now I've been using a delta vfd and a delta...
Replies
1
Views
13
Greetings All, I recently decided to start freelancing in Controls and Automation part time, most of my experience has been with Rockwell...
Replies
2
Views
55
I am having a problem communicating my PLC with Drive via Modbus connection. I start by opening the port and there is no problem, but then when I...
Replies
5
Views
38
Back
Top Bottom