Vetteboy
Member
- Join Date
- Jul 2002
- Posts
- 380
I have been maintaining Panelview Plus terminals connected over ethernet for a few years and now would like to added a PV+ to a DH+ network. I have the comm card added and the driver configured.
I am hitting a wall with setting up my HMI tags, alarm tags, etc. Nothing seems to work. I know I'm missing something easy. I am starting from scratch and when I try to create a tag I expect to drill down to the PLC and specify a table, but instead the software locks up looking for something I obviously haven't configured.
Does anyone out there have a quick cheat sheet on doing this? I am digging through the manual but it is very slow and painful.
Thanks!
I am hitting a wall with setting up my HMI tags, alarm tags, etc. Nothing seems to work. I know I'm missing something easy. I am starting from scratch and when I try to create a tag I expect to drill down to the PLC and specify a table, but instead the software locks up looking for something I obviously haven't configured.
Does anyone out there have a quick cheat sheet on doing this? I am digging through the manual but it is very slow and painful.
Thanks!