Panelview plus 7 batch script

stu

Member
Join Date
Aug 2005
Location
England
Posts
773
Hi guys
I have had a thought regarding a quick hmi screen change for none experienced staff , is there a way that we can have a sd card or a usb with a batch script on to automatic add the correct IP address and the correct program , has anyone done this ? I would like to make the engineers life a bit easier
Any information would help thanks
Stu
 
This sounds more complicated to do than just teaching them how to do it, unless I seriously overestimate your engineers!
 

Similar Topics

Hello, I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and...
Replies
0
Views
77
Hi people, I am trying to send an audit trail and other logs from the Panelview plus 7 to a network share. Its one of the older CE embedded...
Replies
2
Views
141
Rockwell in their wisdom have made a mess of the Panelview Plus 7 operator interface terminals with all the different series hardware revisions...
Replies
5
Views
198
Dear Friends, I have face a lot of problems using Panelview Plus 7 Series B with Win10 IO: I can not map a netwaork drive, when using file...
Replies
0
Views
100
Back
Top Bottom