stewy5000
Member
Hello All, I have a Parker CTC touch screen Which connects with M340 Modicon plcs and also comunicates with a data aquisition computer using Interact X ( all through ethernet). So im not sure of what block of logic i need (in the plc) to enter a numeric input with 7 to 8 numbers. I would like to enter a 7 digit number into the touchscreen and see it at the Data Aquisition computer. I can enter a number up tp 65000 or so and it will read at the computer but it wont take or display any number bigger than that. i Just get a broken pencil icon. Any help on what logic I need to move a number like 8448600.
Thanks
Brian
Thanks
Brian