SmartGuard600 and NAT

alexbeatle

Member
A
Join Date
Feb 2010
Location
San Francisco
Posts
188
Hello,

I have a local Ethernet network. SmartGuard + CompactLogix + 2 AutomationDirect HMIs.

After adding 1784-NTR and adding network translation, I am able to access CompatLogix, but not SmartGuard. Cannot even ping it.

Do SmartGuard's have restrictions?

Thank you.
 

Similar Topics

S
possibilities with AB smartguard600?
Hi We're doing some safety related jobs and i wonder what posibilities the Allen Bradley's smartguard600 have? it's mostly about connecting some...
Replies
6
Views
2,147
kolyur
K
P
Siemens Scalance SC636-2C NAT config
Hi all, I have some difficulties with programming a NAT config in my Scalance SC636-2C When programming the NAT-table i'm not able to reach my...
Replies
4
Views
113
goghie
G
I
Communications Through Stratix NAT
Hi Guys I am looking for some help to get communications going through a Stratix 5700 with a NAT rule in it. I did not set the stratix up but I...
Replies
2
Views
996
ian.smith7
I
moistcat
Moxa N-port Serial server 5110A - NAT
Hi All, I have set up a Moxa NPort serial server for an application. Unfortunately the environment requires NAT forwarding between 2 systems...
Replies
3
Views
802
Lare
L
C
AB 1783-NATR vs MOXA NAT-102
We've been using Allen-Bradley's 1783-NATR and find it is easy enough to work with. Unfortunately, it only allows 5 ports to be opened per IP...
Replies
2
Views
745
Ken Moore
Ken Moore
Back
Top Bottom