Converting filte types in FactoryTalk csv files

10suwe

Member
1
Join Date
Nov 2019
Location
Sjælland
Posts
7
Hello

I am sitting with a system which is fully working with an HMI from FactoryTalkView and a program file from studio5000.



I would like to make the HMI a "dummy" version so that it is independent from the plant.

I would like to convert all my referenced tag to internal tags and have already exported an csv. file, but how do I convert the tags? All I can see is that there is different letters for the tag type but not which tag type it refers to?
 

Similar Topics

O
Converting STL to Lader
Hello everyone, can anyone help me with covert the STL code to ladder. Iam using plc s71200. A %DB1.DBX33.7 // angel of vaccum...
Replies
2
Views
208
RVaughan
RVaughan
F
Converting.Rss file to. Pdf for PLC lab
Hello PLCs Forum, I am in a bit of a pickle and was hoping someone could offer me some help. I have a .rss file and just need to see the ladder...
Replies
2
Views
122
fnick50
F
P
Need help Converting STL to SCL in TIA v17
Hello nice to meet you, im new in here, I'm currently trying to convert code written in STL for a S7-400 to SCL for an S7-1500, because when i run...
Replies
5
Views
317
JesperMP
JesperMP
E
Converting SLC500 to CompactLogix
Hello, did anybody know, if there exist an converting cable like the1492-CM1746-M01 (for an 1746-IB16 to an 5069-IB16), for an 1746-HSCE to an...
Replies
3
Views
389
Ernest#Germany
E
L
Converting Powerflexs to ethernet from devicenet
Hello, This will be my first time converting powerflex 40's and 400's from devicenet to ethernet. I did some research, and it seems I will need...
Replies
4
Views
750
Ken Roach
Ken Roach
Back
Top Bottom