Function Block not inputting the correct values

Engrlife

Member

E

Join Date

Aug 2017

Location

British Columbia

Posts

41

• Jan 23, 2020

• #1

The inputs of my custom function block, do not match the values that are shown when you refine the block. Unity pro 13.1 M580

 

Engrlife

Member

OP

E

Join Date

Aug 2017

Location

British Columbia

Posts

41

• Jan 23, 2020

• #2

Input to the block shows 70, internal side shows 0

 

Engrlife

Member

OP

E

Join Date

Aug 2017

Location

British Columbia

Posts

41

• Jan 23, 2020

• #3

The function block is not being entered every scan cycle for some reason. Any suggestions

 

Lare

Member

L

Join Date

Jan 2006

Location

Finland

Posts

2,048

• Jan 24, 2020

• #4

Can you post couple screenshots and exported function block.
Without more info it will be difficult to say anything

 

Engrlife

Member

OP

E

Join Date

Aug 2017

Location

British Columbia

Posts

41

• Jan 24, 2020

• #5

We managed to figure out what the issue was. For some reason when we copied the DFBs it didnt create new instances of them. So regardless of the tags into the blocks being different, there was multiple blocks called "generic_alarm_1" So internal tags were overwriting each other