Communication btw Studio 5000 View Designer with 5000 Studio Logix Emulate

hbenkaab.takeda

Member
H
Join Date
Apr 2020
Location
Belgium
Posts
6
Dear Network,
I created a simple program with 3 tags In1, In2 and Out (if In1 and In2 then out) and I downloaded it to my Emulogix 5868 (I'm using Studio 5000 logix designer V32 and Studio 5000 logix emulate) . I created a display with Studio 5000 View designer an added a Numeric display to show the value of the tag "Out". Since I donc have an HMI I used the emulator of the Studio 5000 View designer. when I run the application the Numeric display become Red showing an error "BAN Controller Status Indicator Not Supported on Windows" "Enable to reach the controller emulate"
Thanks in Advance for your support.

Capture.PNG error.jpg
 

Similar Topics

N
No BTW/BTR communication with 1771IFE/C Analog in card
EDIT: The CPU is a PLC5 5/60, we are programming with RsLogix5 Dear PLCTalkers, I'm currently at a customer (for a different project but i like...
Replies
3
Views
4,911
Navles
N
P
communication btw PLC and server
we have the sytem in which a lot of PLC 5/80E, 5/40E,SLC 5/05 etc are connected thru ethernet to HP-alpha server. Now the server has been updated...
Replies
10
Views
4,836
iant
iant
Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
29
Voltimus
Voltimus
S
Modbus communication help
Hi all I need help on this As in my project used Schneider TM241 controller. Now I want to communicate Elite energy meter with controller by...
Replies
3
Views
87
Corsair
C
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
78
yawin
Y
Back
Top Bottom