EICS
Member
i have 2 near identical machines both have their own HMI (original Panelview 10" on Remote I/O comms) & PLC (PLC5/20E Ethernet)they are all on same network.
the HMI application is exactly the same on both machines but the plc program differs slightly due to other equipment.
i am upgrading the hmi to Panelview + 1000 (ethernet) so both the PLC's and HMI will all be on ethernet. i want to keep the HMI's as same ap[plication but the target PLC's will be different and i dont want one HMI writing to the other PLC etc.
How do i manage the same HMI application on FTV to 2 different plc targets. that is only the HMI on that machine to control its own PLC
the HMI application is exactly the same on both machines but the plc program differs slightly due to other equipment.
i am upgrading the hmi to Panelview + 1000 (ethernet) so both the PLC's and HMI will all be on ethernet. i want to keep the HMI's as same ap[plication but the target PLC's will be different and i dont want one HMI writing to the other PLC etc.
How do i manage the same HMI application on FTV to 2 different plc targets. that is only the HMI on that machine to control its own PLC