Horner HE-XT104 usb question

iNickster

Member
I
Join Date
Jan 2018
Location
SC
Posts
8
I have a Horner HE-XT104 PLC. Can I use a standard USB mini-B cord to update the firmware on the PLC through cScape?
 

Similar Topics

D
Reset PLC Horner?
I was loading a program onto an XE1e2 PLC and it got stuck on these two windows and won't progress. It won't let me connect from the PC to reload...
Replies
0
Views
57
Data_name
D
J
simulation setup using horner OCS using structured text (Cscape)
I am trying to set up a piece of equipment with a Horner HE-X4R. I'd like to use structured text and so far I'm just trying to get a basic On/off...
Replies
0
Views
57
jdk202
J
D
Plc Horner Modbus Error
I am having a problem communicating my PLC with Drive via Modbus connection. I start by opening the port and there is no problem, but then when I...
Replies
6
Views
185
Data_name
D
A
Horner XL7 PLC and Eaton MMX VFD Control signal issue.
Hello, I’m new to this forum and if I’m posting incorrectly let me know. I’ve been having an issue I can’t seem to figure out. I’m sure it’s...
Replies
1
Views
113
bkottaras
B
G
Horner Cscape Tag based. Move real to int array
I seem to be making this harder than it should be, and Its not making any sense. I simply need to move a real variable to two integer variables...
Replies
8
Views
967
g.mccormick
G
Back
Top Bottom