hi....guys...i am using PL7 junior v4.3 software for TSX MICRO PLC -MODICON MAE ..can u guys suggest me how to establish communication betwenn PLC and pc?..i tried but failed to communicate .i am using TSXPCX1031 cable for communication. error showing is NOT POSSIBLE TO ESTABLISH PHYSICAL LINK WITH PLC ADDRESS SYS VIA DRIVER UNTLW01...........
Pc and plc coomunication problem
- Thread starter niyaz432
- Start date
Similar Topics
i have two plc
1. s7-1212dc/dc/dc ip; 192.168.0.1
2. s7-1500 1513-1pn ip; 192.168.3.2
i need to get data from plc1 to plc2. any idea how to do...
HOW to communicate with OPTIX and Mitsubishi's Q Series PLC?? PLEASE HELP ME
Hello..I am new to Plc.I have Mitsubishi Melsec Fx3Ga-40MR PLC controlling a machine for packing powder.Currently the Plc has issue which power...
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ?
In the Simatic manager, we used Netpro to do...
Hi,
I would like to assemble a simulator/practice booster pump system that uses PID to maintain steady water pressure under various outlet demands...