Wondering if anyone here has commissioned an FMP53 guided-radar probe and is familiar with the current output when the sensor is in blocking distance.
We've got an existing piece of equipment that uses one and it works as it should. But, when the tank level goes into the blocking distance the output level drops to minimum(4mA).
Is there any parameter to change the blocking distance signal from minimum to max? I'm not finding anything in the docs and I'm guessing that we're working with a limitation of the probe itself and not the transmitter module.
Thanks!
Mike in ND
We've got an existing piece of equipment that uses one and it works as it should. But, when the tank level goes into the blocking distance the output level drops to minimum(4mA).
Is there any parameter to change the blocking distance signal from minimum to max? I'm not finding anything in the docs and I'm guessing that we're working with a limitation of the probe itself and not the transmitter module.
Thanks!
Mike in ND