Differance between DC servomotor & AC servomotor

vnkarwa

Guest
V
I want to know the differance between AC and DC servocontrol motors as well as Drives. Also I want a comparison with normal motors.
 
Eric Nelson said:
Here's a pretty simple explanation...

CLICK HERE

beerchug

-Eric
Click to expand...


Thanks a lot beerchug. This site is very useful for me.
Write me again & again for useful informations.

Thanks.
Venu.
 

Similar Topics

G
Differance between actual and set point speed
We have problem in our Siemins drive SIMOVERT MV type number 6SE8001 when we look the actual speed we find it more than setpoint speed and the gap...
Replies
2
Views
2,554
DickDV
D
P
Devicenet pin differance, 5 vrs 4?
I am a little new to Devicenet and I have to get a robot station up and running. The current Devicenet cables in the station are all 4 pin. The...
Replies
13
Views
5,304
Joe_WaZoo
Joe_WaZoo
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
42
Chris3EC
C
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
80
yawin
Y
S
Modbus TCP connection between my plc and a power meter on TIA Portal
Hello gentlemen, Im working on a small project on TIA Portal, about establishing a Modbus TCP connection between my ET200SP plc and a socomec...
Replies
11
Views
247
saad94
S
Back
Top Bottom