khalilyousaf
Member
I am working to control some objects using Weintek HMI through Fatek PLC. I wrote a simple program to control an output Y_0 using input X_0. I just put a toggle button to control a led. I selected plc-fatek plc. Communication protocol is RS232. Whenever I go for online simulation, the button and led go invisible and plc shows a pop up "NO RESPONSE".
If I connect a button without any tag of plc then it appears during online simulation but when I define tag from fatek plc then this issue comes.
Kindly guide.
If I connect a button without any tag of plc then it appears during online simulation but when I define tag from fatek plc then this issue comes.
Kindly guide.