HeadlessEng
Member
Hi guys,
I'm trying to set up the ability to alter the set-point temperature on a Piovan TH0118-F unit through the PLC. I've set up and configured a Moxa N-port Express DE-311 to connect the Piovan to the PLC. When I use RS who i can browse to the Moxa device and it appears as an unrecognized device.
I'm not sure what the next step is to get it working.
Is it possible to get the PLC to send a hex code through the Moxa device to the Piovan unit?
Any help/advice would be appreciated.
Thanks,
HeadlessEng
I'm trying to set up the ability to alter the set-point temperature on a Piovan TH0118-F unit through the PLC. I've set up and configured a Moxa N-port Express DE-311 to connect the Piovan to the PLC. When I use RS who i can browse to the Moxa device and it appears as an unrecognized device.
I'm not sure what the next step is to get it working.
Is it possible to get the PLC to send a hex code through the Moxa device to the Piovan unit?
Any help/advice would be appreciated.
Thanks,
HeadlessEng