Redland Brick
Member
- Join Date
- Mar 2005
- Posts
- 24
Hi Folks ,
I have a question. Did any of you ever have any problems with
going online with a Guard PLC with RS Logix 5000 v 14.1.
The problem is that we get a major fault and it deletes the program.
I believe the fault is a power up fault.This only happens when
we try to go online.
These are the versions and setup that we have:
Processor Firmware 14.32
RS Linx 2.43.01.23 (CPR 6 )
RS Logix 5000 14.1
Windows XP
We have a company here from Europe that installed the machinery
and they do not not have any problems. The only differences
I see is they have RS Linx 2.50.00.20 and Windows 2000.
Do you guys have any ideas,
I have a question. Did any of you ever have any problems with
going online with a Guard PLC with RS Logix 5000 v 14.1.
The problem is that we get a major fault and it deletes the program.
I believe the fault is a power up fault.This only happens when
we try to go online.
These are the versions and setup that we have:
Processor Firmware 14.32
RS Linx 2.43.01.23 (CPR 6 )
RS Logix 5000 14.1
Windows XP
We have a company here from Europe that installed the machinery
and they do not not have any problems. The only differences
I see is they have RS Linx 2.50.00.20 and Windows 2000.
Do you guys have any ideas,