configuration compact logix L32E plc with S4M00-2004-0200T zebra printer on ethernet

sahebanna

Member
S
Join Date
Nov 2009
Location
Bangalore
Posts
16
Hi friends,
I want to configure compact logix L32E PLC with S4M00-2004-0200T Zebra printer on ethernet network, and i want to send some data from PLC to printer, so how to do the configuration and how to send the data (in what format) from plc to printer? please help me on this. if you have same configuration example programs is very helpful for me.
 

Similar Topics

R
Issue with IP configuration of compact logix
hey guys, I have L32E compact logix processor installed in my facility & it happened to fail abruptly.Subsequently I replaced it with a new...
Replies
3
Views
3,061
Geoff White
G
A
45DMS-B8LAT1-D4 configuration
Hello I have a sensor that I read data with IO-LINK but I don't know how to get my data. I see that I have two modes : Process data Map0 and Map...
Replies
0
Views
47
ahmeduqat
A
K
Kinetix configuration fault Command Notch Filter Width Undefined attribute
Kindly, we have the following configuration fault on a Kinetix 5700 axis. It only appears when we go online on the Plc. We are just starting the...
Replies
2
Views
87
Kataeb
K
Q
Updating IP Gateway of ENBT card in a Redundant Configuration
Hi All, Has any of you tried to change the IP Gateway of the PLC (of course, essentially of the ENBT card), while in a redundant configuration...
Replies
3
Views
127
QasimFSH
Q
B
Adding IB16S to the IO configuration - Logix Designer v31
Hello, Im building project with 1756-L82ES controller and 1756-IB16S card but i cant find it when trying to add the card to IO configuration...
Replies
3
Views
135
robertmee
R
Back
Top Bottom