Displaying tim eon C-more panel from CLX

I would like to use the external clock source function to display time on a 15" C-more EA9 panel. The source would be a Logix processor. When I went to set up the tags in the C-more, I set them up as signed int 32. I referenced the tag in the program, and got an error "Error tag-058: Tag I/O type does not match Object type.


What do I need to do to display the CLX PLC time on the C-more?


Thanks

https://www.automationdirect.com/microsites/c-more/software-help/Content/128.htm

https://support.automationdirect.com/docs/an-ea-004.pdf

The above links may help you out.
Regards,

Displaying time on a C-more from CLX

OK. I was able to get the clock on the C-more to read the PLC time. It was a matter of selecting external clock source in the C-more software and identifying the correct tags to reference in the CLX program. In this instance , the PLC clock is the master.


Now I would like to be able to adjust the PLC clock from the HMI.
Basically, be able to adjust for daylight savings time.


How might I do this?


Thanks.