Hello all, I'm running FTView ME v8, RS Logix500 Pro v 11, RSLinx Classic Gateway 3.9, and Emulate500 v 6... all connected though RSLinx OPC Server, there are no shortcuts, or anything for that matter, set up through RSLinx Enterprise.
I set up a simple program with "Start, Stop, Running," and some simulated analog. "Start and Stop" are communicating with FTView and the buttons toggle the bits in the program with no issues, but nothing else (Output from the program to FTView) communicates... I set up a multistate indicator tied to a bit, but it displays "Error" on its display, I attempted using some numeric displays and they only display "**" on their displays. I also tried a floating point bar graph, but it's showing only as an outline when tested.
Any suggestions?
I set up a simple program with "Start, Stop, Running," and some simulated analog. "Start and Stop" are communicating with FTView and the buttons toggle the bits in the program with no issues, but nothing else (Output from the program to FTView) communicates... I set up a multistate indicator tied to a bit, but it displays "Error" on its display, I attempted using some numeric displays and they only display "**" on their displays. I also tried a floating point bar graph, but it's showing only as an outline when tested.
Any suggestions?