Edops 2plus Eberle Plc 511

abuelfun

Member
Join Date
Apr 2004
Location
khartoum
Posts
30
hello
friends

I tried to communicate plc eberle 511s with pc but i failed and a message appears (communication eror).
Then i tried to set the plc , the following was the result :
baud rate 300 fixed (can not be adjusted)
barity bit odd fixed
stop bit 1 fixed
data bits 8 fixed
com port 1 adjustable.
Also we adjust the pc as plc setting . but the same problem appears.
Please your colaboration & help in solving this problem

best regards.
 

Similar Topics

I have a model EBETLE PLS551 EDOPS 2. Inside program have one address 770 but i do not what is the function for this address. Sample Program...
Replies
2
Views
1,793
I've been translating Edops 2 program into something more understandable. I got at least half of it figured out. There are a few odd things it...
Replies
47
Views
30,679
Im looking for the software & Cable for the Eberle 511 Plus PLC. I have this on my print machine and want to check the status of the program. Any...
Replies
1
Views
49
Looking to get a program off of an older Eberle Vario P-621 PLC. I don't know much about Eberle, but some quick research brought up the idea of...
Replies
2
Views
1,037
I purchased the software, cable and laptop to talk to a EBERLE PLS511 and I'm getting a comm error. I have my port set up the same as the...
Replies
3
Views
2,150
Back
Top Bottom