squints
Member
I have the new servos up and communicating. Will the tag names in the motion group be the same or are there new tag names associated with the new servos? Anyone have experience with this?
Upgrading from 1394 Sercos servos to 2094 kinetix Servos
- Thread starter squints
- Start date
Similar Topics
I am looking to upgrade some of our old Servo Drives to the newer kinetix 5700 style.
currently we have 4 1394 axis that are all driven by 5kw...
Hi,
I am upgrading a Wonderware SCADA form version 9.5 to version 23.
I am able to migrate all the graphic, but when to activate the runtime this...
We are in the process of upgrading a controls system. The existing system is a SLC500 with some IO cards and a 1747-SDN module communicating to a...
Hello, We are currently running a bunch of g310's connected to their SLC5 PLCs through ethernet.
I've attempted to upgrade the program from 2.0...
Hello everyone,
My company has an old line for building DC motors. Many machines are from the early 90's and some requests for safety...