simplelogix
Member
Hi Folks,
Greetings! I need your valuable help.
I have this Omron CJ1G PLC and I want to interface it with iFix over ethernet as a standalone system on my laptop. (Purely for testing purposes only. Hence a standalone system will do). I have just the basic ideas about SCADA/HMI and have not built any system. Yes, an absolute newbie.
The OPC server is from Kepware. Please guide me through the process database development process. I understand I have to run the SCU utility first. Other than that, I am lost.
Thanks a lot for your help.
Greetings! I need your valuable help.
I have this Omron CJ1G PLC and I want to interface it with iFix over ethernet as a standalone system on my laptop. (Purely for testing purposes only. Hence a standalone system will do). I have just the basic ideas about SCADA/HMI and have not built any system. Yes, an absolute newbie.
The OPC server is from Kepware. Please guide me through the process database development process. I understand I have to run the SCU utility first. Other than that, I am lost.
Thanks a lot for your help.